Emergency Preparedness
First ResponderCBR OverviewGeneratorsPumps
Structural Fire Fighting Equipment
Fire HosesFire BootsFire HoodsFire Gloves
Specialty Fire
Equipment
Catalog
Safety Equipment
Lighting & Beacons
All American
Annin Flags
Rockland Fire
HomeAbout UsCustomer ServiceSizing GuideLinks
|
HONDA WSP100AA
1 HP electric submersible trash pump with automatic starting is constructed of 304 Stainless Steel with heavy duty impeller and has standard built in thermo automatic reset.
- 1 HP Electric Submersible Pump
- 150 gal./min. capacity
- Automatic Starting
- Stainless Steel Case
- Non-mercury Auto Float Switch
- Built-in Thermal Auto Reset
- 25-foot Heavy-Duty, 115V Cord
- 1 Year Residential Warranty
- 1 Year Commercial Warranty
HONDA WSP100AA • Price: $759.00 plus freight To order call 845-358-1939 • Fax 845-358-1974
|
| SPECIFICATIONS |
| Pump Type |
Submersible Trash Pump |
| Manual/Automatic |
Automatic Float Switch
(Non-Mercury) |
| Motor |
1 HP |
| Voltage |
115 |
| Starting amps |
47 |
| Running amps |
11.1 |
| Duty |
Continuous |
| Motor Insulation |
Class F |
| Overhead Protection |
Built-In Thermal Automatic Reset |
| Discharge |
Side |
| Discharge Capacity |
150 gal/min |
| Maximum Head |
42 feet |
| Port Diameter (inches) |
2.0 FNPT |
| Maximum psi |
18 psi |
| Solids Handling |
2.0" |
| Impeller |
Single Channel Stainless Steel |
| Seals |
Tandem Mechanical Carbon
Ceramin-upper
SIC/SIC-lower |
| Cord Length |
25 feet |
| Cord Type |
Heavy-Duty 115V |
Dimensions
(W x H) |
9.0" x 22.8"
(the discharge port is attached to the side of the volute, therefore the width at the discharge port is larger than the pump diameter) |
| Pump Diameter |
7.5" |
| Dry Weight |
41 lbs |
|
|
HONDA WSP73
3/4 HP electric submersible pump with automatic starting.
- 3/4 HP 115V Submersible Top Discharge Pump
- 74 gal./min. capacity
- Lightweight Durable .304 Stainless Steel Impellor & Case
- Non-mercury Auto Float Switch
- Rated for Continuous Duty Use
- Double Mechanical Seal Construction
- 50-foot SOW/ASO UL Listed Cord
- UL Listed
Honda WSP73 • Price: $579.00 plus freight To order call 845-358-1939 • Fax 845-358-1974
|
| SPECIFICATIONS |
| Pump Type |
Submersible Standard |
| Manual/Automatic |
Automatic Float Switch
(Non-Mercury) |
| Motor |
3/4 HP |
| Voltage |
115 |
| Starting amps |
48 |
| Running amps |
12.2 |
| Duty |
Continuous |
| Motor Insulation |
Class F |
| Overhead Protection |
Built-In Thermal Automatic Reset |
| Discharge |
Top |
| Discharge Capacity |
74 gal/min |
| Maximum Head |
54 feet |
| Port Diameter (inches) |
1.5 FNPT |
| Maximum psi |
23 psi |
| Solids Handling |
0.375" |
| Impeller |
Stainless Steel |
| Seals |
Tandem Mechanical |
| Cord Length |
50 feet |
| Cord Type |
Heavy-Duty 115V |
Dimensions
(W x H) |
8.3" x 17.2" |
| Pump Diameter |
8.3" |
| Dry Weight |
27 lbs |
|
|
HONDA WSP53
1/2 HP electric submersible pump with automatic starting.
- 1/2 HP 115V Submersible Top Discharge Pump
- 70 gal./min. capacity
- Lightweight Durable .304 Stainless Steel Impellor & Case
- Non-mercury Auto Float Switch
- Rated for Continuous Duty Use
- Double Mechanical Seal Construction
- 50-foot SOW/ASO UL Listed Cord
- UL Listed
HONDA WSP53 • Price: $529.00 plus freight To order call 845-358-1939 • Fax 845-358-1974
|
| SPECIFICATIONS |
| Pump Type |
Submersible Standard |
| Manual/Automatic |
Automatic Float Switch
(Non-Mercury) |
| Motor |
1/2 HP |
| Voltage |
115 |
| Starting amps |
36 |
| Running amps |
9 |
| Duty |
Continuous |
| Motor Insulation |
Class F |
| Overhead Protection |
Built-In Thermal Automatic Reset |
| Discharge |
Top |
| Discharge Capacity |
70 gal/min |
| Port Diameter (inches) |
1.5 FNPT |
| Maximum psi |
19 psi |
| Solids Handling |
0.375" |
| Impeller |
Stainless Steel |
| Seals |
Tandem Mechanical |
| Cord Length |
50 feet |
| Cord Type |
Heavy-Duty 115V |
Dimensions
(W x H) |
8.3" x 17.2" |
| Pump Diameter |
8.3" |
| Dry Weight |
27 lbs |
|
|
HONDA WX10K1A
Lightweight 1" Pump
- Powerful, easy-start, Honda Mini 4-stroke engine
- 37 gal/min capacity
- Lightweight aluminum pump - weighs only 13.4 lbs
- Uses regular gasoline - no mixing of oil and gas
- Standard transport handle
- Garden hose adapter, suction hose, clamps and strainer included
HONDA WX10K1A • Price: $459.00 plus freight To order call 845-358-1939 • Fax 845-358-1974
|
| SPECIFICATIONS |
| Pump Type |
General purpose, Centrifugal, Self-priming |
| Engine |
Honda 4-stroke, single cylinder, air cooled GX25/OHC |
| Displacement |
25cc |
| Bore and stroke |
1.4" x 1.0" |
| Compression ratio |
8.0:1 |
| Fuel tank capacity |
.5 liter |
| Volute |
Aluminum |
| Impeller |
Aluminum |
| Mechanical seal (Pump case/ impeller) |
Carbon/Ceramic |
| Priming time |
80 sec at 16.4 ft |
| Drive system |
Direct |
| Discharge capacity |
37 gal/min |
| Suction port diameter |
1" NPT |
| Discharge port diameter |
1" NPT |
| Total head lift |
118 ft |
| Suction head lift |
26 ft |
| Maximum pressure |
51 psi |
| Solids handling |
N/A |
| Dimensions (LxWxH) |
12.8" x 8.7" x 11.8" |
| Dry Weight |
13.4 lbs |
|
|
HONDA WX15AX2
Lightweight Pump
- Powerful, easy-start, Honda Mini 4-stroke engine
- 72 gal/min capacity
- Lightweight aluminum pump - weighs only 20 lbs
- Uses regular gasoline - no mixing of oil and gas
- Standard transport handle
- Hose clamps and strainer included
- Protected by Honda Oil Alert ®
HONDA WX15AX2 • Price: $554.00 plus freight To order call 845-358-1939 • Fax 845-358-1974
|
| SPECIFICATIONS |
| Pump Type |
Lightweight, Centrifugal, Self-priming |
| Engine |
Honda 4-stroke, single cylinder, air cooled GXH50/OHV |
| Displacement |
49cc |
| Compression ratio |
8.0:1 |
| Honda Oil Alert® |
Standard |
| Volute |
Aluminum |
| Impeller |
Aluminum |
| Mechanical seal (Pump case/ impeller) |
Carbon/Ceramic |
| Priming time |
120 sec at 16.4 ft |
| Drive system |
Direct |
| Discharge capacity |
72 gal/min |
| Suction port diameter |
1.5" NPT |
| Discharge port diameter |
1.5" NPT |
| Total head lift |
125 ft |
| Suction head lift |
26 ft |
| Maximum pressure |
54 psi |
| Solids handling |
N/A |
| Dimensions (LxWxH) |
12.8" x 10.8" x 14.8" |
| Dry Weight |
19.8 lbs |
| Strainer part # |
78325-YBO-751 |
|
|
HONDA WB20XK2
General-Purpose Pump
- Powerful, easy-start, Honda commercial OHV engine
- 152 gal/min capacity
- Silicon carbide mechanical seal
- Cast iron volute and impeller
- Heavy-duty full frame protection
- Isolation mounted engine and pump
- Protected by Honda Oil Alert®
HONDA WB20XK2 • Price: $574.00 plus freight To order call 845-358-1939 • Fax 845-358-1974
|
| SPECIFICATIONS |
| Pump Type |
General Purpose, Centrifugal, Self-priming |
| Engine |
Honda 4-stroke, single cylinder, air cooled GX120/OHV |
| Displacement |
118cc |
| Compression ratio |
8.5:1 |
| Honda Oil Alert® |
Standard |
| Volute |
Rigid Mounted |
| Impeller |
Cast Iron |
| Mechanical seal (Pump case/ impeller) |
Silicone Carbide/Silicone Carbide |
| Priming time |
110 sec at 16.4 ft |
| Drive system |
Direct |
| Discharge capacity |
152 gal/min |
| Suction port diameter |
2" NPT |
| Discharge port diameter |
2" NPT |
| Total head lift |
92 ft |
| Suction head lift |
26 ft |
| Maximum pressure |
40 psi |
| Solids handling |
N/A |
| Dimensions (LxWxH) |
17.9" x 14.4" x 16.5" |
| Dry Weight |
46 lbs |
| Strainer part # |
78325-YG3-000 |
|
|
HONDA WB30XK2
General-Purpose Pump
- Powerful, easy-start, Honda commercial OHV engine
- 275 gal/min capacity
- Silcon carbide mechanical seal
- Cast iron volute and impeller
- Heavy-duty full frame protection
- Isolation mounted engine and pump
- Protected by Honda Oil Alert®
HONDA WB30XK2 • Price: $734.00 plus freight To order call 845-358-1939 • Fax 845-358-1974
|
| SPECIFICATIONS |
| Pump Type |
General Purpose, Centrifugal, Self-priming |
| Engine |
Honda 4-stroke, single cylinder, air cooled GX160/OHV |
| Displacement |
163cc |
| Compression ratio |
8.5:1 |
| Honda Oil Alert® |
Standard |
| Volute |
Rigid mounted cast iron |
| Impeller |
Cast iron |
| Mechanical seal (Pump case/ impeller) |
Silicone Carbide/Silicone Carbide |
| Priming time |
150 sec at 16.4 ft |
| Drive system |
Direct |
| Discharge capacity |
275 gal/min |
| Suction port diameter |
3" NPT |
| Discharge port diameter |
3" NPT |
| Total head lift |
85 ft |
| Suction head lift |
26 ft |
| Maximum pressure |
37 psi |
| Solids handling |
N/A |
| Dimensions (LxWxH) |
20.1" x 15.2" x 17.9" |
| Dry Weight |
60 lbs |
| Strainer part # |
78325-YG4-000 |
|
|
|
|
|